重要新闻-联邦恢复技术移民

有空来坐坐

联邦移民部长康尼在今天（周三）宣布，将于2013年5月4日起恢复对技术移民类申请的审理，但是会对原有的计分标准则做出较大调整。新标准更注重申请者的语言能力，优先吸纳年轻申请人，并将建立国外学历评审制度。

据悉，今年6月份加移民部以积压过多和新移民失业率过高为由，停止技术移民计划，并将08年以前的28万份申请“一刀切”，这在全世界引发了普遍抗议。移民部现在宣布重新启动，但对申请者的计分标准则进行了重新调配。联邦政府的此前计划对联邦技术移民的评分制度改革早在意料之中，但重开时期设在2013年5月4日，比预计的要晚
同旧的技术移民实行计分制一样，新的制度满分也是100分，而申请者达到67分以上即可过关。不同的地方则是：首先，新的制度对语言的要求更高，增加了语言得分，语言熟练的申请人最多可拿到28分。移民申请人须先语言考试(加拿大语言标准，CLB 7级或雅思6分)和学历认证，这将是申请的先决和最重要的条件。语言总分是28分，比旧制度高了4分
其次，新标准更青睐年轻申请者。35岁以下的申请人最多将可得到满分12分。此后，分数随着年龄增大而递减，46岁以上的申请人将得不到任何分数。而根据旧例，年龄介于21岁至49岁的申请人只可获得10分。
第三，加拿大将在海外建立对申请人教育证书的评审制度。移民部将于明年上半年在海外指定一批评审代理机构，以防证书作假或欺骗，并确认申请人的国外学历水平等于或接近加拿大的同等学历水平。至于工作经验的总分只有15分，比旧制度下的21分大大减少。不过，想在这方面拿满分也不容易，必须要有6年的工作经验，比旧的制度多了两年。

康尼在记者会上说，“新的‘联邦技工计划’将确保加拿大甄选我们的经济所需要的技术移民，他们最有可能在加拿大取得成功，并实现他们的潜力。”例如，新制度下会保证新移民的有足够语言能力，确保其入境后找得到工作。调查显示，语言能力是取得高薪岗位的最重要因素。

与此配套的是，加拿大移民部在本月10日新增了一项名叫“熟练技工计划”的移民类别。这一类别降低了对英法语的要求，只要有最基本的语言能力即可；但这一新计划却严格地强调必须有雇主或省份已向你提供了具体的工作岗位，入境后即可投入工作，而不会给加拿大带来经济负担。此外，申请人必须有两年以上所申报岗位的工作经验。这一新类别的设立，为的是解决加拿大一些领域现在所急需的技能工人。据移民部长肯尼透露，加现在最缺的是电工、焊工、重型装备机工、油气管线安装工等，所需工种将于年底前公布。这一新的熟练技工计划于2013年1月2日起即开始实施。但第一年名额将只有3000人，以后视实施效果再做相应调整。

据悉，加拿大联邦政府现正与各省和地区政府磋商，将于明年1月2日前出台一份短缺技工类别名单。根据目前透露出来的信息，电工、焊工、重型装备机械工以及输油管铺设装配工等，是其中急需的几项。

gunsmoke

想移民的同志，可以考虑学个电工证先。

有空来坐坐

今天难得gunsmoke有时间，我们忙里偷闲去密西沙加市看看房子，在此祝Eddie在2013事业大发，财源广进

gunsmoke

有空来坐坐 发表于 2013-1-2 23:06
今天难得gunsmoke有时间，我们忙里偷闲去密西沙加市看看房子，在此祝Eddie在2013事业大发，财源广进 ...

加拿大广阔天地，大有作为，咱们共同进步

有空来坐坐

当地时间2013-01-02，移民局公布联邦技工新政细则如下：

--------------------------------------------------------------------------------

当地时间2013-01-02，移民局公布联邦技工新政细则：
*其中语言要求是：听说CLB5级，读写CLB4级，分别对应雅思听5.0，说5.0，读3.5、写4.0。
*职业要求（NOC code）必须以下：
Group A – Jobs with sub-caps of 100 applications each (and their corresponding 2011 NOC code)

7202 Contractors and supervisors, electrical trades and telecommunications occupations
7204 Contractors and supervisors, carpentry trades
7205 Contractors and supervisors, other construction trades, installers, repairers and servicers
7271 Carpenters
7301 Contractors and supervisors, mechanic trades
7302 Contractors and supervisors, heavy equipment operator crews
8211 Supervisors, logging and forestry
8221 Supervisors, mining and quarrying
8222 Contractors and supervisors, oil and gas drilling services
8241 Logging machinery operators
8252 Agricultural service contractors, farm supervisors and specialized livestock workers
9211 Supervisors, mineral and metal processing
9212 Supervisors, petroleum, gas and chemical processing and utilities
9214 Supervisors, plastic and rubber products manufacturing
9231 Central control and process operators, mineral and metal processing
9241 Power engineers and power systems operators
9243 Water and waste treatment plant operators
Group B – no sub-caps (2011 NOC code)

7231 Machinists and machining and tooling inspectors
7233 Sheet metal workers
7235 Structural metal and plate work fabricators and fitters
7236 Ironworkers
7237 Welders and related machine operators
7241 Electricians (except industrial and power system)
7242 Industrial electricians
7243 Power system electricians
7244 Electrical power line and cable workers
7245 Telecommunications line and cable workers
7246 Telecommunications installation and repair workers
7251 Plumbers
7252 Steamfitters, pipefitters and sprinkler system installers
7253 Gas fitters
7311 Construction millwrights and industrial mechanics
7312 Heavy-duty equipment mechanics
7313 Refrigeration and air conditioning mechanics
7314 Railway carmen/women
7315 Aircraft mechanics and aircraft inspectors
7318 Elevator constructors and mechanics
7371 Crane operators
7372 Drillers and blasters - surface, mining, quarrying and construction
7373 Water well drillers
8231 Underground production and development miners
8232 Oil and gas well drillers, servicers, testers and related workers
9232 Petroleum, gas and chemical process operators

*至少2年相关工作经验；
*有雇主或者职业资格。
*工作时间上的要求，这个自己看吧

其中大家最关心也是最坑爹的是雇主或者职业资格吧，有了雇主当然好办啦，没有雇主的只能签个旅游签去办职业认证吧，哈哈，对于职业资格认证，大家都可以出出主意吧，不然技工就全挂看了。
对于职业资格认证，因为非常重要，我另外开贴讨论：
2013联邦技工职业资格认证：
http://forum.iask.bz/showthread.php?...52#post8740052




原文及链接：
http://www.cic.gc.ca/english/immigra.../apply-who.asp
Determine your eligibility — Skilled trades
The Federal Skilled Trades Program is for people who want to become permanent residents based on being qualified in a skilled trade.

Note: to avoid backlogs and ensure fast processing times, we will accept no more than 3,000 complete applications for processing in the first year (from January 2, 2013 to January 1, 2014).

Within the 3,000 cap, no more than 100 new applications for certain jobs will be considered for processing each year. There is no sub-cap for other skilled trades. See which applications we are currently accepting.

To apply, you must:

plan to live outside the province of Quebec (Note: The province of Quebec chooses its own skilled workers. If you plan on living in Quebec, see Quebec-selected skilled workers for more information),
meet the required levels in English or French for each language ability (speaking, reading, writing, and listening),
have at least two years of full-time work experience (or an equal amount of part-time work experience)* in a skilled trade within the five years before you apply,
meet all job requirements for that skilled trade as set out in the National Occupational Classification (NOC), and
have an offer of full-time employment for a total period of at least one year** or a certificate of qualification in that skilled trade issued by a provincial or territorial body.
*“Full-time work” means at least 30 hours of work over a period of one week, or an equal amount in part-time, paid work experience. For example:

if you worked 15 hours per week in one job over four years, or
if you worked a total of 30 combined hours per week in more than one job over two years.
**Up to two employers can commit to employing you for at least one year of continuous full-time work, meaning at least 30 hours of work over a period of one week.

National Occupation Classification (NOC) requirements

Skilled Trades currently eligible for the FSTP are organized under these major groups of the NOC:

Major Group 72, industrial, electrical and construction trades,
Major Group 73, maintenance and equipment operation trades,
Major Group 82, supervisors and technical jobs in natural resources, agriculture and related production, and
Major Group 92, processing, manufacturing and utilities supervisors and central control operators.
These major NOC groups are subdivided into different occupations. In total, 43 jobs (with specific NOC codes) will be eligible to apply under the FSTP in the first year of the program. We will accept no more than 100 applications for certain occupations. Other jobs do not have a limit of 100. See which applications we are accepting.

FSTP applications must be made based on the 2011 version of the NOC. However, if the application includes a Labour Market Opinion from Human Resources and Skills Development Canada based on the 2006 version of the NOC, it will be accepted by CIC as long as the applicant’s occupation corresponds to a 2011 NOC code that is eligible for the program.

Language testing

You must show you meet the minimum requirements in English or French for each of the four language abilities:

reading,
writing,
speaking, and
listening.
To do this, you must take an English or French language test from an organization approved by CIC. You must then include the results of your test with your application.

Inadmissibility

Some people are inadmissible—they are not allowed to come to Canada. Several things can make you inadmissible, such as being involved in criminal activity, in human rights violations or in organized crime.

You can also be inadmissible for security, health or financial reasons. Find out more about inadmissibility.

Do not apply under the Federal Skilled Trades Program if you are not admissible to Canada.

If you are not sure if you should apply as a skilled trades worker, try the Come to Canada Wizard to find out if you would be eligible.